Aloha, fun & authoritative answers -- no cost, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Metal finishing Q&As since 1989

-----

Want Pure Titanium Coating

Q. I'm looking to coat Stainless Steel with Titanium - Not TiN or TiO2, just elemental Ti. What would be the best process? From my understanding PVD maybe the best method - is this correct?

RFQ: And does anyone know of companies that do this type of work?

Craig Perlman
- Portland, Oregon January 26, 2013

A. Yes, PVD is perhaps is the easiest way to deposit Titanium. One can use cathodic arc, sputtering, or electron beam variations of PVD. Of these cathodic arc is simplest and gives good adhesion though finish would be a little rough.

H.R. Prabhakara - Consultant
Bangalore Plasmatek - Bangalore Karnataka India
First of two simultaneous responses -- January 31, 2013

A. PVD would be the best method. Anyone who can deposit TiN can deposit titanium. I'm sure you can find someone in your area.

Jim Treglio - scwineryreview.com
PVD Consultant & Wine Lover - San Diego,
California
Second of two simultaneous responses -- January 31, 2013

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: