Mr. Rogers: "Look for the Helpers. You will always find people who are helping."
As an Amazon Associate & eBay Partner: we earn from qualifying purchases

finishing.com -- The Home Page of the Finishing Industry

-----

Need Latest Spec Revisions

Q. What are the latest rev's of the following specs?

MIL-C-23422
AMS 2404
ASTM B177
AMS 2438
AMS 2468
AMS 2469
MIL-STD-753

Dave McKay
- Cleveland, Ohio
2000

A. You can check these standards on line.

stinet.dtic.mil/ for military and DOD documents
www.astm.org for ASTM standards
www.sae.org for AMS specifications

Larry Hanke
Minneapolis, Minnesota

A. Hi, Dave. Here are your specs linked to their latest revisions --

MIL-DTL-23422 -- rev. F, but classified, not available on line
AMS2404
ASTM B177
AMS 2438
AMS 2468
AMS2469
MIL-STD-753 [⇦ this spec on DLA / cancelled]

Readers can both support this website and save some time by following the hotlinks. The small commission Techstreet offers us covers our time to hot-link directly to the latest version of all specs from one place, enabling one click and done.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
(Ted is available for instant or longterm help)

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: