Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Want bluing that goes all the way through for golf irons





July 5, 2012

Q. I'm a golfsmith and do some grinding on wedges. There is a company in Florida that finishes golf clubs, and the bluing goes all the way thru the metal -- you can grind it later and polish it it will look new. Any idea on how he does it? Ronnie.

Ronnie Smith
- Alto, NM



July 6, 2012

A. Hi Ronnie.

I certainly don't claim to know everything, or to have seen everything there is to see. But when I have never seen anything even remotely like that in a whole career, and it contradicts what I have been taught, I'm hard put to believe it.

Regards,

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey


none
finishing.com is made possible by ...
this text gets replaced with bannerText
spacer gets replaced with bannerImages

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA