Q. Currently we are in the process of designing a range of stainless steel products, and now need to specify Pantone colours. We have selected some normal colours and metallics to begin with and are looking for a high shine on the selected colours to give them debth.
My question is how can we specify a finish on these selected colours ?
John Cavanagh product designer - Cork,Ireland
April 4, 2012
Hi John. You haven't described what sort of coating you wish to apply. Are you speaking of polyester or epoxy powder coatings, or wet paint, or what?
Ted Mooney, P.E. Striving to live Aloha finishing.com - Pine Beach, New Jersey
finishing.com is made possible by ... this text gets replaced with bannerText
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: