Where the world gathers for
plating, anodizing, & finishing Q&As since 1989
-----
Composition of MIL-A-8625 - Type 1C anodizing bath
February 28, 2012
Q. Hi fellows,
I have a doubt about the bath composition of the type 1C of MIL-A-8625.
According to this MIL standard, this bath shall be prepared using mineral or mixed/mineral organic acids (non-chromic acid), I never heard about this bath before, even though a company that use this process. So, does someone know a bath composition for this MIL type and would like to share?
Thank you!
Bruno Pires
- San Jose dos Campos, Brazil
finishing.com is made possible by ...
this text gets replaced with bannerText
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: