Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)
Where the
world gathers for metal finishing
Q&As since 1989
-----
Standard silver plating on switchgear bus
September 30, 2011
For manufacturers of Low Voltage Switchgear:
1) What is the standard thickness for silver-surfaced (plated) copper bus?
2) What is the standard thickness for tin-surfaced (plated) copper bus?
3) My company's specs call for 0.0002 inch sliver plating on the switchgear bus, can multiple manufacturers fulfill this?
Frank Morrison
Consultant Engineer - Jacksonville, Florida
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: