Summary for used salt spray chamber Discussion
Need used operational salt spray test chamber is the core request in this short thread: the poster is looking for an approximately 8 cu ft chamber to run aluminum conversion coating testing to MIL-DTL-5541. The excerpt provided does not include any replies, recommendations, or named expert advice, so there is no discussion of specific brands, sources, or technical cautions beyond the original need. The only concrete detail is the intended use: verifying conversion coating performance with salt spray testing under the military specification. Because no answer text is present, the thread reads as a straightforward RFQ rather than a solved Q&A, and no conflicting views or alternative approaches are shown in the available source.
RFQ: I am looking for a used salt spray chamber.
Casey W. [last name deleted for privacy by Editor]
– Minneapolis, Minnesota, U.S.A.
2003
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
RFQ: I am looking for a small salt spray cabinet to perform tests per ASTM B117 on 2024-T3 bare panels.
Nicolas C [last name deleted for privacy by Editor]
– Mirabel, PQ, Canada
2003
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
RFQ: I need a salt spray test chamber but all the resellers and refurbishers on the web have chambers that have a footprint of 8.5 feet x 6 feet by 4 feet or thereabouts. To us that’s like shooting a fly with a howitzer. Does anyone know where I can get a used SMALL salt spray/fog cabinet for running maybe 5-8 panels a week in?
Wyatt B. [last name deleted for privacy by Editor]
– Binghamton, New York
2005
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
RFQ: Dear Sirs,
We need a salt-fog (plus sulfur dioxide, if possible) chamber, V=0.5 cubic meter. Funding is limited, thus a restored used chamber would do.
Vyacheslav V. [last name deleted for privacy by Editor]
– Minsk, Belarus
2006
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
RFQ: Need used operational salt spray chamber approx. 8 cu ft to perform aluminum conversion coating testing to MIL-DTL-5541
[⇦ this spec on DLA] for captive operation.
Larry Page
Electronics Mfgr – Mineral Wells, Texas, USA
April 27, 2011
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).