Where the world gathers for
plating, anodizing, & finishing Q&As since 1989

-----

Copper isolation from galvanized metals

September 23, 2010

I have to isolate copper flashings from galvanized tube steel, what product would you reccomend, the job is a hospital regulated by OSHPD inspectors

Vic Maynez
project manager - Orange, California, USA

September 27, 2010

Hi, Vic.

I don't understand the picture you are trying to paint, but not connecting them is a better approach than relying on a goop or sealant to isolate them. Plastic spacers and plastic bolts perhaps?

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

finishing.com is made possible by ...
this text gets replaced with bannerText

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: