I am trying to blacken pewter jewellery, tried liver of sulphur did not work. Could anybody advise a solution which can be purchased rather them made (needs to be commercial size packaged)
Peter Perkins manufacturer - Birmingham, United Kingdom
September 3, 2010
Try 20%iron(III)chloride solution(objects must be grease and oxide free!).At internet archive you can download/free!/ very good old book on metals colouring by Arthur Hiorns,there you can find small chapter on colouring of tin and pewter.Hope it helps and good luck!
Goran Budija - Cerovski vrh Croatia
finishing.com is made possible by ... this text gets replaced with bannerText
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: