-- The Home Page of the Finishing Industry

on this site
current topics
Live! From beautiful Pine Beach New Jersey: Welcome to the world's most popular metal finishing website

topic 54958

Need pure lead plating on an Inconel vacuum seal

May 2, 2010

I have some Inconel seals, c-seals, that I need plated with pure lead. The purity is not critical. I have had these seals plated at a shop that does not do pure lead all the time and have had major issues with thickness, uniformity, and one batch with very poor adhesion. The seals are rectangular, approx. 3 inches by 2 inches, with circular c cross section, .063 inches high. The material is .010 inches thick, Inconel 718. These seals were plated at one time with lead and stripped. Please contact Doug Hawk

Doug Hawk
Aerospace - Beltsville, Maryland, USA

Readers: our advertisers make this site possible for technical information exchange & camaraderie; they will contact the inquirers privately regarding any commercial needs. Please appreciate that the site would drown in spam overnight if we posted offers to sell from people paying nothing.

If you have a question in mind which seems off topic, please Search the Site

ADD a Q, A, or Comment on THIS topic START an UNRELATED topicView CURRENT HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2019, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.