on this site FORUM
Live! From beautiful Pine Beach New Jersey: Welcome to the world's most popular metal finishing website
Need polishing from 45 RMS to 5 on tool steel
April 26, 2010
I have about 75 1"x 1/2" x 1/4" D2 tool steel blocks. We need one face (1x1/2") polished from its current 45 RMS state to 5 RMS as our local supplier of the blocks cannot do better. I need to know what the cost and lead time would be if you are interested.
Aerospace Mfgr - Morristown, Tennessee, USA
Readers: our advertisers make this site possible for technical information exchange & camaraderie; they will contact the inquirers privately regarding any commercial needs. Please appreciate that the site would drown in spam overnight if we posted offers to sell from people paying nothing.
If you have a question in mind which seems off topic, please Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.