on this site FORUM
Live! From beautiful Pine Beach New Jersey: Welcome to the world's most popular metal finishing website
Need Uniform and Very Heavy Zinc Phosphate Coating for Drawn Wires
March 28, 2010
One of our customer has demanded for Coating Thickness of 6 microns min. on finish drawn wire. Previously we were processing wire in phosphate solution with parameters as TA - 18 to 22 & FA - 2 to 4, but to meet the requirement we have changed the parameter with higher concentration i.e. TA - 31 & FA - 5, even though we are no getting that much coating thickness, after cold drawing it is approx
3 to 5 and even the coating is non uniform. Kindly guide me
Supervisor - Thane, Maharashtra, & India
If you have a question in mind which seems off topic, please Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.