Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Looking for a Distressed Antique Bronze finish for aluminum substrate

We provide chrome plated fasteners and covers for the motorcycle industry. We have a request for an aluminum axle cover with a distressed antique bronze bronze plate-the same finish you would find on a kitchen cabinet door handle. However the finish we require must withstand exterior elements of rain and sun. I have looked at anodizing, powdercoat, and PVD coatings with no success. Does anyone know of a process that may work?

Brian Smith
product sales - Troy, Michigan, USA
March 11, 2010

Hi, Brian. Real bronze plating should work. Finishing.com recently did a project for IZA where an antique bronze plating supplied by IPS Industrial Polishing Services performed very well in corrosion testing. Best would be to electroless nickel plate the aluminum first.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
March 11, 2010

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: