Starting a plant suitable for zinc plating with yellow passivation

Dear sir ,for starting a plant suitable for coating(zinc plating with yellow passivness),
How much capital investment is needed ,with space required

Arvind Nyayadhish
product designer - Aurangabad, Maharashtra, India
January 10, 2010

January , 2010

Hi, Arvind. You need to retain a consulting engineer with experience in designing plating plants or, at the least, have a half-day conference with an application engineer for a plating process supplier as a starting point. Plating factories are not standard catalog order items but are custom designed to the particular components and required production rates.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.

Q, A, or Comment on THIS thread -or- Start a NEW Thread

No dead threads!
Your Q, A, or Comment puts this thread on The Finishing.com HOTLINE.

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: