No registration or passwords; no pop-up ads -- just aloha, fun, & answers.
(as an eBay Partner & Amazon Affiliate earns from qualifying purchases).
Home /
T.O.C.
Fun
FAQs
Good
Books
Ref.
Libr.
Advertise
 
Help
Wanted
Current
Q&A's
Site 🔍
Search
pub  Where the
world gathers for metal finishing
Q&As since 1989



-----

Some Help Required Reg. Anodised Aluminium in Mirror Finish




Hello Sir / s,

We are manufacturers of Out Door Street & Indoor Commercial / Decorative Lighting Fixtures of all kinds..for achieving better reflectivity & lumens output, we have to get our Aluminium Reflectors anodised to mirror finish locally ...but the quality of finished product is not to our satisfaction...so we are looking for commercial quality mirror finish aluminium sheets/ coils OR some different & effective way of doing the job in our own premises...If you could please help us in this regard ..we shall be obliged....Thanks very much

Sunil Taneja
- India
2000


You can find a readymade hi reflector sheet of aluminium which is available readily in markets. And please tell what is your method currently of giving mirror finish on aluminium.

Nitin
fashions - Bangalore, Karnataka, India
2004




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"