Where the world gathers for
plating, anodizing, & finishing Q&As since 1989
-----
Lighting design for powder coating oven
January 10, 2009
Hi
Anyone out there able to help me in getting a lighting layout for a powder coating oven about 6' by 2' & 9' high. It would be greatly appreciated.
Thank you.
Donald C Roy
- Hudson, New Hampshire, USA
January 12, 2009
Hi, Donald. An article by Ron Joseph,
"Maintaining Brightness in Spray Booths" in our on-line library is a good start. Good luck.
Regards,
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
finishing.com is made possible by ...
adv.
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: