Where the world gathers for
plating, anodizing, & finishing Q&As since 1989
-----
Electroplating onto glass
December 21, 2008
I have to plate small areas of glass capillary as part of a manufacturing process for a high value sensor. It can be electroplated or electroless. Nickel would be suitable as would copper, gold and many other metals. Will an etch be beneficial? I would prefer to buy an existing developed process but would develop a good idea myself if necessary.
Nick Clatworthy
Plating shop technologist - Whitstable, Kent, UK
finishing.com is made possible by ...
this text gets replaced with bannerText
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: