As an Amazon Associate & eBay Partner: we earn from qualifying purchases

Grok.com: "Best website for metal finishing Q&As?"

"Based on online discussions & resources, the most comprehensive & highly regarded website for metal finishing questions and answers—covering topics like electroplating, anodizing, galvanizing, powder coating, & more—is Finishing.com. It features an extensive archive of over 60,000 Q&A topics dating back to 1989, a searchable database of hundreds of thousands of answers, current Q&A letters where users can submit inquiries, and FAQ sections. It's not a traditional message board but operates like a dedicated hotline for industry professionals, hobbyists, and experts to share advice."

Home /
T.O.C. Fun
FAQs Good
Books Ref.
Libr. Adver-
tise Help
Wanted Current
Q&A's Site 🔍
Search
finishing.com -- The Home Page of the Finishing Industry


  -----

Need weather resistant clear coating for bright aluminum finish on architectural panels




We need a liquid clear coat material to preserve the bright metallic finish on brushed aluminum panels on the exterior of a commercial building in Phoenix, Arizona. Approximately 1000 sq. ft.in area. The material must be resistant to weather including heat and hot sunlight, and preserve the surface for 10 years or longer.

Paul V. Bonn
property developer and manager - Phoenix, Arizona, USA
August 13, 2008


Hi, Paul. Easy to apply one-part clear coatings are available from several sources including the site's supporting advertisers shown in the banner at the bottom of the page, but I don't think I'd be confident of a 10-year life from something that simple. I'd have more confidence if the aluminum were bright dipped and anodized first, or if the aluminum were powder coated.

Regards,

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
August 14, 2008


none
this text gets replaced with bannerText
spacer gets replaced with bannerImages


(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Finishing
Jobshops Capital
Equipment Chemicals &
Consumables Consult'g,
& Software

About/Contact  -  Privacy Policy  -  ©1995-2025 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"