Metal finishers helping each other -- No cost, No registration, No damn popups
(we earn from 'affiliate link' purchases, making the site possible)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Weatherizing new copper to match existing panels

Hi, I have a company that has an airconditioning unit on the roof of their building. Some hoodlum stole two sheets. The insurance company has asked us to replace the sheets but with the 2 new sheets put up against the old sheets it will not look nice. What can I use to pre-weather the copper to match the old copper?

Angie Larue
remodeling contractor - Bristol, Connecticut
August 8, 2008

Hi, Angie. When in the third world, do what the third worlders do. You won't get a good match and the hoodlums will steal a mix of new and old next week anyway. So beat them to it by selling the remaining copper for scrap yourself, then replace it all with copper colored aluminum :-)

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
August 11, 2008

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: