Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Electrochemical etching on S.S.

sir,

I want to use the electrochemical process for etching on SS304. Kindly guide me on :
1) what voltage transformer shall I use.
2) Should the output be ac / dc
3) what will be the suitable electrolyte
4) what shall be anode and cathode

Maitri Gala
buyer - India
June 30, 2008

June 30, 2008

Hi, Maitri. Letters 1273, 1473, 7784, 12455, 15151, 25962, and 40814 address some aspects of this technology. Good luck!

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: