Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Designing a New Plating Shop

I am currently in the process of starting a small plating shop in a still undetermined area of BC. I am capable of designing shop process and layout, but this would be foolish if there is experienced consulting available. I have looked around but have been unsuccessful in finding anyone in the BC area. Is there anyone that can help? I could meet with someone from the Washington state area as well, otherwise it might well have to be long distance consulting. Any advice would be appreciated.

Brian Chiasson
- Surrey, BC, Canada
2000

2000

You might start with my article "Plating Shops for the Nineties and Beyond".

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.

We will be happy to offer you our consulting services with respect to designing the shop process and layout. We are a company that has developed simulation software for the optimization of electrochemical processes.

Please feel free to contact me for further information on our software and services.

Tom Muyllaert
ElSyCa - Zellik - Belgium
2000

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: