A website for Serious Education, promoting Aloha,
& the most FUN you can have in metal finishing
Finishing.com has been free for 22 years,
but without net neutrality we could soon
cease to exist. Do us a solid, click on
the banner, and contact congress today!
Using tapered bores as a datum
My name is Pat Rohlman. I have a question regarding GD&T and the use of tapers as functional datums. I have a pulley that I am in the process of reviewing and would like to know if anyone has any information about how to specify a tapered bore as a datum - and/or - a good source or example for applying GD&T to a pulley with a tapered bore. Thanks!
Waukesha Engines - Waukesha WI USA
This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.