Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Metal finishing in my world...

We are a small company in Memphis. I am new at this kind of work but I was wondering about what different atmospheres do to a nitric acid tank for passivation and the different oils in the air from the machinery?

Lori Kirk
finisher - Mem, Tennessee, USA
February 21, 2008

I don't think the atmosphere will hurt the nitric acid, but any oil from machinery will. Only spotlessly clean parts can be passivated, not slightly oily ones. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
February 21, 2008

www.finishing.com is made possible by supporting advertisers ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: