Aloha, fun & authoritative answers -- no cost, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Metal finishing Q&As since 1989

-----

Etching plastic

I am looking for a product that would permit to etch on plastic.

Can somebody help.

Thank

Ray

Ray Laporte
homeowner - Brossard, Quebec, Canada
2007

It depends on the type of plastic and what you mean by 'etch' (that is, why you want to etch the plastic). People etch to reveal grain structure, although that doesn't sound applicable for plastic. People etch to improve paint bonding or bonding of electroplating (in that case chromic acid is used on ABS plastic). People etch as a means of engraving. We need more context, please, Ray.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: