No registration, no passwords; no pop-up ads -- just aloha, fun, & authoritative answers.
As an eBay Partner & Amazon Affiliate we receive compensation for qualifying purchases.
Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub  Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Dacrotising or Substitute needed.





2000

Hello,

Would anyone be able to help us in locating a source for Dacrotising Chemicals and also answer these three queries ?

1. Does Zinc-Iron plating prove better than Dacrotising as regards to wear resistance , corrosion resistance, overall performance ?

2. Can Dacrotising be accomplished with simpler machinery such as a Centrifugal Spin Dryer and baking oven, or is installation of a sophisticated Dacrotising plant a must ?

3. Has anyone substituted Dacrotising with any conventional process with good results ?

Your help as always is much appreciated.

Thanks in advance

Khozem Vahaanwala
Khozem Vahaanwala
Saify Ind
supporting advertiser
Bengaluru, Karnataka, India
saify logo



2000

Hello, Mr. Vahanwala:

Dacrotizing is a trademark owned by Metal Coatings International Inc [Chardon, OH] referring to the application of their Dacromet coatings.

It is not a generic process, so we would like to see discretion used in any feedback. We do not want to see anyone slam a given brand name on the one hand, but we also don't want to encourage on these pages the verbose and flowery praise we often see from a manufacturer or a licensee when his/her brand name is mentionedsmiley face

So I would ask our readers to try to keep their responses scientific.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey



2000

Dear Khozem,

For specific answers to your questions I would direct you to contact either Andrew Pfiefer, or Nippon Dacro Shamrock Co. Ltd. NDS covers the India market.

David J. Wolf
David J. Wolf
Medina, Ohio




(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"