Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Preparation and post-treatment steps in Silver Plating

2000

I would like too know how exactly -if possible- to clean a piece before making a silver plating for industrial activity. I would like to know too, if after having make a silver plating, we have to do a post treatment in order to have a better treatment.

Thanks a lot
Hubert.

Martin-Deideir hubert
CEA - France

2000

Hi, Mr. Hubert

How to clean the metal depends on what the metal is.

The Electroplating Engineering Handbook [on AbeBooks or eBay or Amazon] has detailed instructions for pretreating most any metal.

Silver tarnishes very readily, so you need to discourage the tarnishing with a product like Technic's Tarniban; there are other post treatments available. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: