As an Amazon Associate & eBay Partner: we earn from qualifying purchases
Mr. Rogers: "Look for the Helpers. You'll always find people who are helping."

finishing.com -- The Home Page of the Finishing Industry

-----

Lubrication line for cold forging slugs

I am looking for design of a lubrication line for cold forging slugs by phosphating and soaping. Let me know what process is better, barreling or basket transfer and in case of barrel PE could be used or not and at what revolution the drum have to be rotated. In case of basket could I vibrate the basket to get good performance.

Mehran M. Aliha
R&D; Manager - Tehran, Iran
2007

The ideal is 316 stainless steel rotating barrels, Mehran.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted can be retained for immediate
answers or long term project help
2007

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: