Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Magnesium Dichromate





2000

I am looking for a process known as Magnesium Dichromate. I am in the Racecar business and all the Mag parts are treated this way. I would like to start doing this in house being that the parts get abused. The treatment is Black in color and is very thin. Any help would be greatly appreciated.

Thank you,

Jason Weissman
CDI MotorSports - Morris Plains New Jersey, USA



2000

I would not recommend setting this up at home.

David A. Kraft
- Long Island City, New York



2000

I would agree about not doing it at home, but "in house" does not necessarily mean at home. Boeing does a lot of chemical processing "in house" smiley

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey


none
adv.
this text gets replaced with bannerText
spacer gets replaced with bannerImages

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA