Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989







-----

Flame spray information needed



2000

My employer is thinking about offering Aluminum Flame Spray as one of our operations. Since I handle the environmental side of things, I'm looking for as much information as possible about the procedure. As this is only in the discussion stage, I don't have all the incidentals. Still, would one of you please be so kind as to point me to either a good web site or perhaps a book that could answer some of my questions? For instance, the regulatory limits, how possibly to classify the waste, safety issues connected to this process, etc. I appreciate any and all help. Thanks.

Kathleen Ferraz
- Austin, Texas



2002

I've worked with thermo coating , BOC Edwards Kachina and Pentagon in the last 6 years. They all offer aluminum flamespray. Are you still thinking of getting into flamespray or have you already gotten it?

Frank Guzman
- Austin, Texas


none
finishing.com is made possible by ...
this text gets replaced with bannerText
spacer gets replaced with bannerImages

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA