Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Info on Teflon Impregnated Hard Anodise

2006

Could someone help me? A customer has sent me a drawing of an aluminium part which requires a Finish: Teflon Impregnated Hard Anodise Black. I have not heard of it before and would like some info on it.
Would like to know want it is?
Is it just Teflon coat over Anodising?

Jon Avery
Anodise This - Australia

Some say it's anodizing that has been impregnated with teflon. Others say that the pores in anodizing are so small that impregnating them with teflon is impossible, so it's a teflon coating. letter 1819 is a good start, but let your breakfast settle before going there as the subject is a bit contentious :-)

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: