finishing.com -- The Home Page of the Finishing Industry

-----

Hydraulic pipe pickling

I want to do the pickling of hydraulic pipe line which is 400 meters in length and the pipe material is mild steel,now I would like to know how exactly the process is done ,what are the chemicals to be used ,what is their ratio and for how long a period should the pickling should be done.Your immediate response shall be highly appreciated.

AJAY KAPOOR
- HISAR, Haryana, India
2006

The process is done by retaining a firm that specializes in on-site pickling and passivating, Ajay. To start from no knowledge of this process and get to the point of being able to do it yourself with due attention to safety and environmental stewardship requires hands-on training. You cannot learn enough from an internet posting to do anything but put yourself and your co-workers at risk. Sorry.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Ted is available for instant help
or longer-term assistance.
2006

No dead threads! If this page isn't already on the Hotline your Q, A, or Comment will move it there.

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: