We want to develop acid matte tin plating for electrical lugs, connectors using cresol sulphonic acid.
Vinod Dinkar Inamdar
Good luck, Vinod, but experience has shown that no one is going to develop this and then give you the fruits of their labor for free. Maybe you can flesh out your inquiry a little better, whereby you offer some good thoughts and ask rather limited questions. I think that can often work. Good luck. Thanks.
Ted Mooney, P.E. Striving to live Aloha finishing.com - Pine Beach, New Jersey
(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)
Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: