finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsSuggested
Books
Help
Wanteds
Advertise
on this site
FORUM
(current
topics)
topic 4017

Ospho vs. electroplating as Corrosion Prevention


(1999)

I need some help. I am restoring a car and would like some way to protect hardware and small parts from corrosion. Should I just buy new hardware, etc, or is there a simple way. I have read enough about electroplating and such that I know I shouldn't try it at home, and don't need the hassles of disposing my waste. Someone has told me about Ospho [linked by editor to product info at Amazon]. Is it good for what I need ?

John Martin
- San Diego, California


(2005)

 

I am fixing up an old Volkswagen. I have a few questions. Some parts seem to be galvanized, etc. In what way do I restore these metallic parts, with a corrosive resistant coating ? I just don't want to buy all new parts, if there is anyway to refinish them myself. I'm not looking for chrome or necessarily shiny finish. What are bolts, washers, etc finished with when you buy new ones ?

A company Called "Eastwood" sells an electroplating kit. I don't know if I need to electroplate or just use some sort of conversion coating. What are my "do it yourself" options? I just need some general info on types of coatings and their benefits, etc.

John Martin
- San Diego California


(2000)

Unless you have had training in hazardous chemical handling, I don't see why you would want to even try something like electroplating at home. Most of the knowledgeable people who visit this site would agree that electroplating should be handled by a job shop and not by hobbyists. My advice is to find a local plater and pay them to do it for you. You will get professional quality and you can let them deal with the chemicals. In addition, they have the experience to tell you what kind of finish you need for your parts. It may be cheaper to try to "do-it-yourself" but I think the environment and your own health are worth a little extra money. Use the yellow pages, your own research, or the list of platers who support this site.

tim neveau
Tim Neveau
Rochester Hills, Michigan



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.