No cost, no registration, no passwords -- just aloha, fun & authoritative answers
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Need powder to meet Ford WSS-M2P180-A / WSS-M2P90 powder coating spec

2005

Hello, all:
Right now I'm looking for a powder coating to meet Ford WSS-M2P180-A spec. The color should be YGYAXXG or M6388G. The gloss after coating should be 20 ±3. I contacted Rohm & Haas and Dupont; neither has a product to meet that spec.
If you have some information about that, please advise.

Thanks a lot.

Woodear S [last name deleted for privacy by Editor]
auto parts manufacturing - Windsor, ON, Canada

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

Q. Has anyone answered this question? Am I correct that the spec was updated in 2011 to WSS-M2P90? Any suggestions on which powder coat material will meet the 480-hour salt spray spec?

Jeff Peck
- Bloomfield Hills, Michigan USA
November 3, 2016

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: