| Search our quarter-million Q&As |
Home of the finishing HOTLINE since 1989
-----Need Iridite 7p and 17p for copper alloys passivation
⇦ Tip: Readers like to learn from others' situations;
some readers skip abstract questions.
- Chatsworth [California?]
September 6, 2024
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
A. Hi.
Being a hexavalent chromium based formulation, I strongly doubt it.
Luck & Regards,
Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.
Multiple threads merged: please forgive chronology errors and repetition 🙂
RFQ: I need Iridite 7p and 17p for copper alloys passivation on waveguides. Some old mechanical drawings request these surface treatments on waveguide assemblies.
I don't know if they are powders or other because we never see them.
If they are powders we need about 20 Kg. (More in future?)
Please contact me by mail, thank You.
Microwave components, waveguides - Firenze, Italy
2005
Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
Q. Where or how can I get an MSDS or SDS for CHROMATE COMPOUND equivalent to IRIDITE 17P immersion solution?
Wilhelm GrevelJMC - McAlester, Oklahoma, USA
February 1, 2018
A. Hi Wilhelm. Iridite is a MacDermid trade name, so that is who will have the MSDS/SDS for you if the product is still on offer, which I doubt. Try macdermid.com
Regards,
Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.
Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.