on this site FORUM
Live! From beautiful Pine Beach New Jersey: Welcome to the world's most popular metal finishing website
Rebuilding of Operating Pistons for BOP's
BOP = Blowout Preventer
Q. I am looking in detail for the procedure for reconditioning/repair of Operating Pistons for BOP's (particularly Cameron make) with the Colmonoy process. I would like to know the application part, whether HVOF is used or is it spray & fuse or is it high temperature fusion.
Jaishankar, Kuttan Nair
maint. co. - U.A.E.
A. You need HVOF process. Cameron policies are not released to public. However, Contact Sigma Engineering in Abu Dhabi as they have HVOF capabilities and are the agents for Cameron.
- Midland, Texas
If you have a question in mind which seems off topic, please Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.