Aloha, fun & authoritative answers -- no cost, no registration, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Cyanide free alkaline copper

I am considering the use of a Cyanide free alkaline copper plating process prior to nickel, chrome over diecast zinc alloy. I have not read where this environmentally friendly process is taking the world by storm. Is anyone using this type of process successfully within a mass production environment?

Thanks in advance.

Lionel Myers
security products p/l Australia
1999

Some time ago I tried to replace the cyanide copper strike on a copper, nickel, chrome line with a non-cyanide strike. The problems I encountered were varied and may not apply to your process, but it did not fit what I needed. I can give you some information on the type of process I used if you like.

Jim Conner
Anoplex Software

Mabank, Texas USA

1999

Hi, Lionel. EPI / Electrochemical Products Inc. [a finishing.com supporting advertiser] and Zinex offer this process.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 21, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: