No registration, no passwords; no pop-up ads -- just aloha, fun, & authoritative answers.
As an eBay Partner & Amazon Affiliate we receive compensation for qualifying purchases.
Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub  Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Plating on plastic service required in Europe




1999

Ted, Tom
Great site very helpful! maybe yourselves or one of the browsers may be able to help me. I work for a small company that designs and manufacture moulds for the plastic industry and recently a client asked is it possible to chrome plate his plastic product. If so, how is it achieved and is there any company in Europe providing this service? Thanks for your help

regards

Andrew Heekin
- Ireland

Ed. note: Sorry, this RFQ is outdated so private contact is no longer available, but public technical replies are still welcome! No public brand/source suggestions please ( huh? why?)




You must specify the plastic you are using. Not all types can be plated. ABS is the most "platable" plastic. If your plastic can be plated it is no problem to find platers in Ireland or UK, there are a lot of plating on plastic facilities there.

sara michaeli
sara michaeli signature
Sara Michaeli
Tel-Aviv-Yafo, Israel
1999



My company produces plastic parts for automotive industry such as emblems, radiator grilles... Then we are looking for suppliers who could be able to chromium plate these plastic parts in Portugal for our plant in Spain, but we don't find them. Would you be kind enough to give me some addresses of suppliers who could be able to do that.

Yours faithfully.

Nicolas VUILLET
- Oyonnax, France
2000

Ed. note: Sorry, this RFQ is outdated so private contact is no longer available, but public technical replies are still welcome! No public brand/source suggestions please ( huh? why?)





(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact  -  Privacy Policy  -  ©1995-2024 finishing.com, Pine Beach, New Jersey, USA  -  about "affil links"