Where the world gathers for
plating, anodizing, & finishing Q&As since 1989

"Anodizing process question"

-----

2005

I am an Industrialist

I want to know about the Sufuric acid Consumption for anodizing process in aluminum

Also How much conc.of acid should be used for anodizing process.

Padmani Pankaj
- Ahmedabad

2005

Please describe your present process.

Ashok Jadeja
- Anand, Gujarat

2005

How about starting with MIL-A-8625 / MIL-PRF-8625 [affil link or DLA] or maybe DEF STAN 03-25. I would read these to start with and then come back with a rather more structured question.

Brian Terry
Aerospace - Yeovil, Somerset, UK

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: