Where the world gathers for
plating, anodizing, & finishing Q&As since 1989

-----

Durable high-gloss clear coat finish for painted titanium golf clubs

2005

Our business is to refinish the metal (woods) that have been scratched, chipped, etc.
We are currently struggling to find an inexpensive, clear coat finish that is very durable and has a hard shell finish. Using automotive paint and clear coat currently. This has met the needs of the high gloss look we need but is not as hard a finish as we want. Do we need to apply more than 2 coats.

Mark Olsen
1 Putt Golf - White Pigeon, Michigan

2005

Read reply 35475

D.L.Coleman.
- F.N.Q., Australia.

finishing.com is made possible by ...
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: