Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

Stainless steel cleaning with H2O2





2005

Dear Sir.
We're preparing for cleaning one Plate Heat Exchanger Unit with NaOH, Sulfamic acid 10% and Hydrogen peroxide liquid 15%. The material of plates is SUS316.

But we're not sure that Hydrogen peroxide liquid 15% should not harm the SUS316.
We intend soaking the Hydrogen peroxide liquid 15% in the Plate Heat Exchanger Unit for 14-16 hour.

Please send us some recommendation.

Thank you very much.

HUY, TRAN QUANG
SEAREE COMPANY, VIETNAM - DANANG, VIETNAM


none
finishing.com is made possible by ...
this text gets replaced with bannerText
spacer gets replaced with bannerImages



(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA