Home /
T.O.C.
FAQs
 
Good
Books
Ref.
Libr.
Advertise
Here
Help
Wanted
Current
Q&A's
Search 🔍
the Site
pub Where the world gathers for
plating, anodizing, & finishing Q&As since 1989





-----

What materials (chemicals) are used for electroplating zinc-zamac




2005

Q. What materials(chemicals)are used for electroplating zinc-zamac?
I'm looking to electroplate our product and I need this information for my knowledge.

Csaba Darvas
Securitech Group Inc. - New-York, USA



2005

A. Hi Czaba. Zinc / zamac can be electroplated with any of the plateable metals including nickel, chrome, zinc, tin, copper, silver, gold, and about 15 other less common ones, as well as alloys like brass. It really depends on what decorative look and functional needs you are trying to satisfy.

Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey


none
adv.
this text gets replaced with bannerText

spacer gets replaced with bannerImages



(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

 
Jobshops
Capital
Equipment
Chemicals &
Consumables
Consult'g, Train'g
& Software


About/Contact    -    Privacy Policy    -    ©1995-2023 finishing.com, Pine Beach, New Jersey, USA