finishing.com -- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

HomeFAQsBooksHelpWantedAdvertiseForum
topic 3547

Software Search


(1999)

I am looking for good supporting software for wet chemistry metal stripping for my chem lab.Something that would accept titration formulas,sampling concentrations,calculate adds,CPK's, etc. I would appreciate any tips.The software I was originally familiar with, "TRUE CHEM or Tru Chem" ,I can't seem to find anywhere on the net. Maybe someone has heard of it? Any assistance is appreciated.

James L. Miller
semiconductor services - Phoenix, Arizona


(1999)

I remember it, but don't know what happened to it either. Per the Metal Finishing Guidebook there is a company called Tru-Chem Co. in Columbus, OH. If this is them, they will probably be pleased that this message is here. If this is not them, they will be as grateful to hear from everyone as those people whose phone number is too similar to the gas company's.

Ted Mooney, finishing.com Teds signature
Ted Mooney, P.E. RET
finishing.com
Pine Beach, New Jersey


(1999)

You might try LabMan from the Kushner Electroplating School. I am the author of the program, but sales are handled through Dr. Art Kushner. LabMan runs under Win 95, 98 or NT.

I used TrueChem about ten years ago. It was a good program, but I haven't had any contact with its author (Roger Smith, Plano, Texas) for a year or two. Last I heard, it was still a DOS program.

bill vins
Bill Vins
microwave & cable assemblies
Mesa (what a place-a), Arizona 


(2001)

TrueChem is in the process of conversion to Windows. I have done some consulting for Roger Smith on this conversion.

Jamie Brandenburg
- Dallas, Texas


(2005)

TrueChem was rewritten for the windows platform in 2000.
I highly recommend taking a look at the capabilities of this version.
It represents 18 years of great ideas from users.

Roger Smith
TrueChem - Plano, Texas


(2005)

True Chem software is still available. It is now a Windows version and we are using it to control approximately 25 - 30 plating processes. It is an excellent program and I would recommend looking at it for your needs.

James Jensen, Sr.
- Warren, Michigan


October 15, 2009

True Chem is available through TrueLogic and can be purchased through the Metalast website.

William Rosebrook
plating company - Collingdale, Pennsylvania



This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices


©1995-2017 finishing.com     -    Privacy Policy
How Google uses data when you visit this site.