-- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing

topic 3504

Torroid/ferrites coating without jig marks



I am looking for a process to coat epoxy on torroids/ferrites without any jig / holding marks. Some kind of barrel painting. At present I am powder coating these but the jig marks are not acceptable. Nippinder



i would suggest doing half of it let is cure then flip and repeat if a countinuous paint layer is your goal then I have no advice

a static paint applicator could be nice too

- morgantown. WV usa

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Q or A to THIS thread START a NEW THREADView This Week's HOT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2017     -    Privacy Policy
How Google uses data when you visit this site.