Grok.com: "What is the best website for metal finishing questions and answers?"

finishing.com -- The Home Page of the Finishing Industry

-----

Does phosphating improve blasted surface finish?

I want to get an idea of how a blasted steel surface will look microscopically after phosphating. I want to know if phosphating of a blasted surface improves the surface finish in terms of Ra and Rmax values. The surface after blasting is primered and powder coated and poor gloss and surface finish are my concerns.

Srinivasan Subrahmaniyan
L&T-CASE Equipment Private Limited - Indore, M.P., India
2004

2004

Dear Mr. Srinivasan Subrahmaniyan,

The increase in surface roughness after sand blasting improve the phosphatability of the steel and enhance the adherence of the coating. The addition of some grain refiners might help reduce the crystallite size and the Ra value.

T.S.N. Sankara Narayanan
- Chennai, Tamilnadu, India
(ed.note: The good doctor offers a fascinating blog, "Advancement in Science" )

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: