on this site FORUM
Live! From beautiful Pine Beach New Jersey: Welcome to the world's most popular metal finishing website
Excess zinc defect on the galvanized strip surface
Kindly be informed that we have excess zinc on the strip surface in the form of short longitudinal lines (the length of a line is around 5 cm) these lines appear along the length of the coils. This defect appears in the high gauges only and in the hot rolled coils which are processed without rolling. It was noticed that there are hot rolling scales in the incoming hot rolled material. We believe that this may be the reason but we aren't sure. We want to know the universal name of this defect, its reasons and recommendation to overcome it.
Kandil Industries - Sharkia, Egypt
If you have a question in mind which seems off topic, please Search the Site
Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.
If you need a product/service, please check these Directories:
JobshopsCapital Equip. & Install'nChemicals & Consumables
Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices
How Google uses data when you visit this site.