Aloha, fun & authoritative answers -- no cost, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Where the
world gathers for metal finishing
Q&As since 1989

-----

Where to get Copper Nitrate

Where can I find copper nitrate [affil links]? Can anyone recommend something else to rust or patine mild steel... Thanks in advance...

Corby Allbright
- Naples, Fl, Usa
2004

2004

Copper nitrate is available from chemical supply houses, but they may not wish to sell to artists, or have appropriate size containers for that purpose, since they probably usually ship palettes of four 55-gal drums.

For smaller quantities you might want to try Bryant Laboratory [Berkeley, CA]..

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

Any chemist can make you copper nitrate by dissolving copper wire in nitric acid.

Khair Shishani
aircraft maintenance - Al Ain, UAE
2004

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: