-- The Home Page of the Finishing Industry
A website for Serious Education, promoting Aloha,
& the most FUN smiley you can have in metal finishing.
    no popups, no spam
on this site
current topics

topic 3280

Economic and environmental friendly technology to paint metal furniture in a third world country


Dear sirs, We are students of industrial engineering at Pontificia Universidad Javeriana in Cali, Colombia. At this time we are working in our thesis project. We are researching about more economic and cleaner coating processes for metal furniture. We already know about some technologies such as immersion, electrostatic powder coating and airless spray coating. We will appreciate any help telling us about economic and environmental friendly technologies as well as additional information on the technologies we have mentioned above. Thanks for your help.

Jorge Eduardo Hervas
Pontificia Universidad Javeriana - Cali, Colombia


Have you considered Autophoretic coatings. They are virtually VOC free. The cost is relatively low.

M. Arnett
- Flint, Michigan, USA

This public forum has 60,000 threads. If you have a question in mind which seems off topic to this thread, you might prefer to Search the Site

ADD a Comment to THIS thread START a NEW threadView CURRENT TOPICS

Disclaimer: It's not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations may be deliberately harmful.

  If you need a product/service, please check these Directories:

JobshopsCapital Equip. & Install'nChemicals & Consumables Consult'g, Train'g, SoftwareEnvironmental ComplianceTesting Svcs. & Devices

©1995-2018, Inc., Pine Beach, NJ   -   About   -  Privacy Policy
How Google uses data when you visit this site.