PEOPLE helping each other -- No AI, no cost, no reg'n, no damn popups
(As an Amazon Associate & eBay Partner we earn from qualifying purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Testing Alocrom Mil-C-5541 class 3

2004

(New project) Please could someone help me with the following.What is the recognized salt fog test i.e., hours for MIL-C-5541 class 3 on diecast aluminum.

Regards

Martin Larkin
industrial finishes - Burnley, Lancashire, United Kingdom

The salt spray test is specified in MIL-C-5541 paragraph 4.5.1. It's the 168 hours, 5% salt, 6 degrees inclination per ASTM ASTM B117.

Doug Hahn
- Rocky Mount, North Carolina
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: