PEOPLE helping each other -- No AI, no cost, no reg'n, no damn popups
(As an Amazon Associate & eBay Partner we earn from qualifying purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Need shop to clean old electroformed copper waveguides

2004

I have some electroformed copper parts and some copper alloy and BeCu copper rectangular tubing that is corroded due to exposure over years to condensation of water vapor. The corrosion is a light green (patina) color. These parts are used for RF waveguide purposes, and quite valuable, so I am interested in finding someone who can try to clean and remove the copper oxide (e.g., dilute sulfuric acid, Chem Brite, etc. treatments).

I may be able to find some pictures if someone is interested to see some examples.

Robert Wade
project engineer - Kilgore, Texas

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: